We have a Prolian M元30 G6 Server (p/n: 637080-421) with WIndows 2008 R2 operating system. The Mainboard is changed from the HP Technical Support for the second time. PCI Bus 07:41 PCI Bus Error (Slot 0, Bus 0, Device 0, Function 0) System Firmware will log additional details in a separate IML entry if possible System Error 07:41 Unrecoverable System Error (NMI) has occurred. PCI Bus 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 0, Function 0, Error status 0x00000000) PCI Bus 07:41 Uncorrectable PCI Express Error (Embedded device, Bus 0, Device 28, Function 4, Error status 0x00000000) In the ILO Management Log there are this entrys : When we restart the Server then first the 'Rebooting' from W2016 Server is shown for 10 minutes, after this the Bluescreen appears with : DRIVER POWER STATE FAILURE Service Pack iso 06-2018 is allready installed.

The Server is set in BIOS to maximum Performance Mode.Īll Drivers and Firmware are Up to Date. Inserted are 2 x H221, 2x H241 Cards on which is an Netapp E-Series Storage and 4 x LTO7 Tape Drives in an MSL 4048 connected.Īll Engery Save Settings are turned to off. We have the following Problem on an HP D元80 Gen9 Server.

Hp driver power state failure